【Product Name】：Big Bag discharging station, ton bag unloading station, big bag open Bag station, ton bag open Bag station

【Specification model】：Non-standard, suitable for a variety of specifications of a variety of bags of tons of bags

【Application industry】: Widely used in pharmaceutical, food, energy, chemical, paint and rubber industry.

【Product introduction】：The common components of large-bag unloading stations are: bracket parts, lifting parts, tapping parts, bag parts, dust absorbing parts, storage and sending parts, etc.

Lifting the ton bag to the bag part of the material inlet by lifting part (usually electric hoist or pneumatic hoist) manual opening ton of bag unloading Zahan, by the entrainment will be large bag exit clamping, and supplemented by the flapping device to push the flap, to promote the ton bag of powder material fall into the downstream of the tank storage, or through the sending parts straight The material is transported into the subsequent reaction equipment.

The large-Bag unloading station is a new and efficient bag unpacking operation system, in the form of unpacking bag type (suitable for recyclable packaging bag), automatic broken bag type (directly cut the bag). According to the actual needs, this equipment can be equipped with pneumatic tapping or electric vibration device, break the bag agglomeration, and auxiliary smooth The material can also be equipped with pneumatic or manual bag holder and dust collector to discharge the dust, to avoid the harm of dust to the human body, to ensure the environment clean.

【Detailed Introduction 】：T-Bag Unloading station is a new type of high efficiency applicable to 1 T/bag sack Material unpacking operation, the outer packing is mostly woven bag, the form of the bag is manually manual (suitable for reusable packaging bag); Contact with the material part of the material can be selected by the material characteristics or users. This equipment has added the discharge and the dust gas outlet, the dust gas outlet through the pipeline and the single filter dust collector or the central dust removal system is connected, greatly reduces the easy to raise the material to the human body harm and the environment pollution.                   The machine has the advantages of simple and compact structure, good body stability, safe and reliable operation, small amount of maintenance, user-friendly operation and reliable work. can be applied to metallurgical, chemical, construction, food, light industry and other industries.

Processing capacity: 1 bags/times

Packing bag Size: 700x700x600mm (specific according to customer)

Material specific gravity: 0.8~0.9 t/m3

Rack Material: Q235 (specific according to customer)

Contact Material Material: SUS304 (specific according to customer)

Discharge Orifice Pipe Diameter:DN150 (Specific according to customer)

Compressed air: 0.4~0.6mpa

Power supply: Three-phase five line ac380v,50hz

Conditions of Use: Indoor

1)Hang Ton bag on hanger

2)Operate the discharging handle and open the sealing cover of the discharging feeder

3)Operate the electric hoist hanging to the center of the hopper, and then slowly down to the bottom of the material bag to fully contact the hopper,

4)Manual operation will be a ton of bags out of the mouth down through the seal cover, set in the discharge inside the tube, and then operate the discharge handle, so that the sealing cover pressure Hopper

5)Untie the rope at the exit of the ton bag and start discharging the material.

6)Wait for the item to be finished and replace the next bag.

Cable unloading

T-bag discharge material bag mouth diagram:

1. Rack mechanism: Including the main supporting steel frame, reinforcement, bolt mounting plate, etc., there is a fixed pallet type, the cylinder flap support plate type, vibration tray type, etc., depending on the nature of different materials;

2. Discharging mechanism:

Including discharging bracket, discharging shell, discharging inner cylinder and outer barrel, sealing cover, dust gas outlet, etc., the ton-bag unloading device has two cylinders and a single barrel, if the powder is recommended to use a dual-barrel ton-bag discharge, will be a ton of bags out of the bag mouth in the inner ring under the pressure of the seal cover to start unloading, the outer cylinder has exhaust holes can be connected to the central dust removal and independent dust collector, If the use of a single cylinder particles can be, we use hand-raised and under the pressure of a single cylinder seal lid, simple and easy to operate, and the upper and lower positions have self-locking, safe and reliable.

3. Dust collection mechanism: including fan, cartridge, pulse back blowing, etc.

4. Electrical and Control Parts: Dust collection, fan, cylinder, etc.

5. Incidental Equipment: Filter dust remover, rotating feeder.

6. Other: Filter valve, trachea, vibration damping rubber, hoses and so on.

7. Aperture valve: Installed in the top of the T-bag discharge feeder, used to open the closure of tons of packaging bags, in a ton of unloading part of the package, if you do not want to use the remaining ton of material, you can close the aperture valve, and the Department of tons of bag discharge at the mouth of the rope, open tons of bag unloading, with a gourd out ton bag.

8. Compound ton package (small packet) discharging station: can unload ton package material, also can unload parcel (20-25kg) material.