Big Bag discharging station

Big Bag discharging stationis a new high efficiency for 1 T/bag bags of bag material unpacking operations, the outer packaging is mostly woven bags, the form of the bag is manually manual (suitable for reusable packaging bags); Contact with the material part of the material can be selected by the material characteristics or users. This equipment has added the discharge and the dust gas outlet, the dust gas outlet through the pipeline and the single filter dust collector or the central dust removal system is connected, greatly reduces the easy to raise the material to the human body harm and the environment pollution. The machine has the advantages of simple and compact structure, good stability, safe operation, small amount of maintenance, user-friendly operation, reliable work, etc. can be applied to metallurgy, chemical industry, construction, food, light industries, etc.

Discharging mechanism: including discharging bracket, discharging shell, discharging inner cylinder and outer barrel, sealing cover, dust gas outlet, etc. large bag discharging device has two cylinders and a single barrel, if the powder is recommended with double barrel large bag discharge feeder, the big Bag out of the bag mouth sleeve in the inner ring press the seal cover to start unloading, the outer cylinder has the exhaust hole may connect the central dust removal and the independent dust collector, If the use of a single cylinder particles can be, we use hand-raised and under the pressure of a single cylinder seal lid, simple and easy to operate, and the upper and lower positions have self-locking, safe and reliable.

Dust collection mechanism: including fan, cartridge, pulse back blowing.

Electrical and Control Parts: Dust collection, fans, cylinders, etc.

Ancillary Equipment: Filter dust remover, rotating feeder.

Other: filtration valve, trachea, vibration damping rubber, hoses and so on.

Aperture valve: Installed on the top of the big bag discharge feeder, used to open the closure of large bags, in a large bag unloading part, if you do not want to use the remaining large bag of materials, you can close the aperture valve, and the Department of a ton of bag discharge at the mouth of the rope, open a large bag discharge, with a gourd to remove large bags.

Compound Big bag (small bag) discharging station: can unload large bag of material, also can unload small bag (20-25kg) material.

Installation Considerations

Equipment lifting, the wire rope should be bolted to the main frame, because the rack and hopper is not fixed connection, lifting must be kept up, and pay attention to the protection of the surface paint and avoid the impact of the box and accessories.

Before the installation of the components for a comprehensive inspection, the parts are complete, such as the discovery of missing, damaged or deformed, to be amended to be completed before installation.

The anchor bolts must be connected and fastened because of the vibration during operation of the large bag discharging station.

This machine and other equipment connection flange between the need to seal well.

Because of the vibration source, power cable and trachea should be connected firmly, junction box bolts tightened.

Please make sure all piping and wiring are connected correctly before the test machine, and the outer packing protection of the action parts has been removed.

Precautions for use and maintenance

It is not allowed to separate the hanging chain of the electric hoist and the T-bag hanging ear in the process of unpacking the bag.

T bag should be in the center of equipment before entering Hopper.

The operation should not be a ton of bag material sitting in the cylinder tray, to maintain a certain tension chain, to ensure that tons of bags in the blanking process will not be dumped.

The central dust remover must be turned on before the bag to reduce the damage of the dust to the operator.

ton bag If there is material caking this machine can not be torn down bags.

Compressed air should be removed from the oil, compressed air in the access to filter valve should be clean and dry before.

At least once a week to check the large bag unloading station installation bolts, such as loosening must be tightened before the boot operation.

The equipment should be located around the edge of the equipment not less than 2m of the full security guard area.

If the book is not in conformity with the equipment, please refer to the equipment in kind.